SUPERMILL-60 Degree Helix

3 flute, high shear. Finishing cuts especially where tight tolerances or thin walls are needed. Excellent on "gummy" materials.

Regular length

  • 3 Flute
  • Full Eccentric Relief
  • 60° Helix
  • Dubbed End

 

Dia. Shank LOC OAL
EDP#
1/8 1/8 3/8 1-1/2 SM3F125-60
3/16 3/16 9/16 2 SM3F187-60
7/32 1/4 3/4 2-1/2 SM3F218-60
1/4 1/4 3/4 2-1/2 SM3F250-60
9/32 5/16 13/16 2-1/2 SM3F281-60
5/16 5/16 13/16 2-1/2 SM3F312-60
3/8 3/8 1 2-1/2 SM3F375-60
7/16 7/16 1 2-1/2 SM3F437-60
1/2 1/2 1 3 SM3F500-60
5/8 5/8 1-1/4 3-1/2 SM3F625-60
3/4 3/4 1-1/2 4 SM3F750-60
1 1 2 4 SM3F1.0-60

*Stock standard coating is Alcrona.

Stub length

  • Variable Pitch
  • 3 Flute
  • Full Eccentric Relief
  • 60° Helix
  • Dubbed End

 

Dia. Shank LOC OAL
EDP#
1/8 1/8 1/4 1-1/2 SM3F125S-60
3/16 3/16 5/16 2 SM3F187S-60
7/32 1/4 3/8 2 SM3F218S-60
1/4 1/4 3/8 2 SM3F250S-60
9/32 5/16 7/16 2 SM3F281S-60
5/16 5/16 7/16 2 SM3F312S-60
3/8 3/8 1/2 2 SM3F375S-60
7/16 7/16 9/16 2-1/2 SM3F437S-60
1/2 1/2 5/8 2-1/2 SM3F500S-60
5/8 5/8 3/4 3 SM3F625S-60
3/4 3/4 1 3 SM3F750S-60

*Stock standard coating is Alcrona.